Facebook Pixel
Skip to content

Plans of work and risk assessment for asbestos removal operatives - refresher

Overview

The purpose of plans of work and risk assessments for asbestos removal operatives refresher standard is for delegates who have previously passed training to the full plans of work and risk assessments for asbestos removal operatives standard or subsequent refresher training and can provide proof of attendance.

Duration

Minimum half day of 3 learning hours

If e-learning only, the duration is to be at least 50% of this.

Purpose/scope

The purpose of plans of work and risk assessments for asbestos removal operatives refresher standard is for delegates who have previously passed training to the full plans of work and risk assessments for asbestos removal operatives standard or subsequent refresher training and can provide proof of attendance.

Occupational relevance

Training delivered against this standard would be relevant to the following occupational group(s):

  • operative

Delegates pre-requisites

Delegates must have successfully completed training to the plans of work and risk assessments for asbestos removal operatives standard or subsequent refresher 3 years prior to attending this refresher.

Instruction/supervision

As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have:

  • an award in education and training (or equivalent, as per requirements for approved training organisations)
  • successfully completed training to this standard
  • at least 2 years relevant industrial experience
  • a verifiable CV

Delivery

Delivery may be in an on or off the job environment.

All materials and equipment must be of a suitable quality and quantity for delegates to achieve learning outcomes and must comply with relevant legislation.

The class size and delegate/trainer ratio must allow training to be delivered in a safe manner and enable delegates to achieve the learning outcomes.

The following delivery methods may be used in the delivery of this standard:

  • a blend of classroom and demonstration and practice

This standard is considered to contain 51% or more theoretical learning.

This standard is considered to be set at an intermediate level.

Assessment

Methods of assessment considered appropriate for training delivered against this standard are:

For the successful completion of training, delegates must complete an end of course practical assessment or knowledge test that measures all learning outcomes and has a pass or fail criteria.

Where this training is assessed using multiple-choice questions, a minimum of 10 questions must be asked and delegates are required to achieve an overall pass mark of at least 80%.

Quality assurance

Assured

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal

Renewal every 3 years

Classification

Mandatory Renewal

Buffer/grace period

3 months

Approval date

November 2020

Review cycle

On request or 3 years from approval date.

Learning outcomes to be refreshed

The delegate will be able to:

  • outline the purpose of the risk assessment and plan of work
  • comply with organisational policies and procedures to contribute to health, safety and welfare
  • interpret the given information relating to the work and resources when stripping and removing licensed asbestos
  • state the importance of following the procedures, controls and preventative measures set out in the risk assessment and plan of work
  • recognise hazards associated with the workplace that have not been previously controlled and report them in accordance with organisational procedures
  • state other work hazards, including working at height, electrical, slips, trips and falls
  • outline emergency procedures including the uncontrolled release of asbestos fibres into the workplace or outbreak of fire

Additional information about this standard

  • ACAD (Asbestos Control and Abatement Division)
  • ARCA (Asbestos Removal Contractors Association
  • HSE (Health and Safety Executive)
  • NFDC (National Federation of Demolition Contractors)
  • UKATA (UK Asbestos Training Association)
  • IATP (Independent Asbestos Training Providers)
  • BOHS (British Occupational Hygiene Society)
  • RSPH (Royal Society for Public Health)

 

How did we do today? Give feedback