Perimeter Climbing Access & Protection Screens for Advanced Operatives

Duration

1 day of 6 learning hours.

Purpose/scope

The purpose of this standard is to provide the delegate with the knowledge to support in managing/supervising screen activities.

Scope:

• overview & recap of General Operatives Course
• terminology
• principles of climbing screen operations
• purpose and functions of hydraulic components
• lift preparation
• drawing interpretation
• tool and equipment usage
• practical lifting / removal theory / transportation operation
• hazards and risks
• safety features and maintenance – formal recording process
• assessment and test.

Occupational relevance

Training delivered against this standard would be relevant to the following occupational group:

• supervision.

Delegates pre-requisites

Delegates will need to have a Construction based NVQ Level 2 and hold a current CSCS Card (in order to record this training).

Operatives require at least 6 months’ UK Site Experience beforehand.

Delegates must have successfully completed The General Operatives Screens Course plus have an additional 6 months of protection screen experience.

Instruction/supervision

As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have:

• an award in education and training (or equivalent, as per requirements for approved training organisations)
• successfully completed training to this standard
• at least 5 years relevant industrial experience
• a verifiable CV.

Delivery

Delivery may be in an on or off the job environment.

All materials and equipment must be of a suitable quality and quantity for delegates to achieve learning outcomes and must comply with relevant legislation.

The class size and delegate/trainer ratio must allow training to be delivered in a safe manner and enable delegates to achieve the learning outcomes.

The following delivery methods may be used in the delivery of this standard:

• classroom.

This standard is considered to contain 51% or more practical training.

This standard is considered to be set at an advanced level.

Assessment

Methods of assessment considered appropriate for training delivered against this standard are:

For the successful completion of training, delegates must complete an end of course practical assessment or knowledge test that measures all learning outcomes and has a pass or fail criteria.

Where this training is assessed using multiple-choice questions, a minimum of 10 questions must be asked and delegates are required to achieve an overall pass mark of at least 80%.

Safety critical elements will have a 100% pass mark requirement. 

Quality assurance

Assured

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal

Renewal every 5 years

Classification

Mandatory Renewal

Approval date

March 2021.

Review cycle

On request or 3 years from approval date.

Learning outcomes

Additional information about this standard

In addition to this training it is recommended that familiarisation training (equipment specific / bespoke) on the safe use of suppliers’ equipment is undertaken.