Facebook Pixel
Skip to content

Prepare background surfaces to receive screed flooring - Refresher

Overview

The purpose of the Prepare background surfaces to receive screed flooring - Refresher course is for delegates who have previously passed the full Prepare background surfaces to receive screed flooring course or subsequent refresher course and can provide proof of attendance.

Duration

2 days of 6 learning hours per day. If e-learning only, the duration is to be at least 50% of this. 

Purpose/scope

The purpose of the Prepare background surfaces to receive screed flooring - Refresher course is for delegates who have previously passed the full Prepare background surfaces to receive screed flooring course or subsequent refresher course and can provide proof of attendance. 

Occupational relevance

Training delivered against this standard would be relevant to the following occupational group(s):

  • operative and craft.

Delegates pre-requisites

Delegates must have successfully completed training to the Prepare background surfaces to receive screed flooring standard 3 years prior to attending this refresher. 

Instruction/supervision

As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have:

  • an award in education and training (or equivalent, as per requirements for approved training organisations)
  • successfully completed training to this standard
  • at least 2 years relevant industrial experience
  • a verifiable CV.

Delivery

Delivery may be in an on or off the job environment. 

All materials and equipment must be of a suitable quality and quantity for delegates to achieve learning outcomes and must comply with relevant legislation. 

The class size and delegate/trainer ratio must allow training to be delivered in a safe manner and enable delegates to achieve the learning outcomes.  

The following delivery methods may be used in the delivery of this standard: 

  • classroom / practical learning 
  • e-learning 
  • a blend of classroom and e-learning. 

This standard is considered to contain 51% or more practical training. 

This standard is considered to be set at an intermediate level.

Assessment

Methods of assessment considered appropriate for training delivered against this standard are:  

For the successful completion of training, delegates must complete an end of course practical assessment or knowledge test that measures all learning outcomes and has a pass or fail criteria. 

Where this training is assessed using multiple-choice questions, a minimum of 10 questions must be asked and delegates are required to achieve an overall pass mark of at least 80%. 

Quality assurance

Assured

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal

Renewal every 3 years.

Classification

Mandatory Renewal.

Buffer / grace period

3 months.

Approval date

May 2021

Review cycle

On request or 3 years from approval date.

Learning outcomes to be refreshed

Learning outcomes to be refreshed

The delegate will be able to:

Additional guidance to support learning outcome

describe the methods and equipment available to prepare and profile substrates to receive screed flooring 

Including types and sizes of equipment for the following: 

  • grinding 

  • multi-stripping 

  • planing 

  • shotblasting  

interpret guidance and specifications relating to preparing background surfaces to receive screed flooring 

  • BS 8204 series where relevant 

  • Contract information such as job sheets, method statements, specifications, COSHH assessments and risk assessments 

  • Product information such as technical datasheets & chemical safety datasheets 

  • Condition of the substrate & materials to be removed 

select and wear the appropriate personal protective equipment (PPE) 

The delegate will have an understanding or knowledge of the health & safety issues relating to the use, storage and maintenance of the different types of PPE available to protect themselves including goggles, head protection, safety footwear, gloves, ear defenders, respiratory protective equipment, high visibility clothing etc. 

  • FeFRA Guide to PPE for use with In-situ Resin Floors & Surface Preparation 

state how to comply with relevant legislation and official guidance when operating plant or machinery to prepare, profile and finish substrates for specified materials 

  • Responsibilities regarding potential accidents, health hazards and the environment 

  • Site inductions 

  • RIDDOR 

select the appropriate method, machine size, accessories/shot blasting medium and ancillary equipment to effect project requirements 

  • Understand the types of surfaces suitable for preparation by the various methods e.g. new or old concrete, asphalt etc. 

  • Understand the profiles created by the various methods 

  • Consider the materials to be removed e.g. resin finishes, ceramic tiles, latex screeds, adhesives, carpet, vinyl etc. 

  • Consider the materials to be applied and the material manufacturer’s guidelines and specifications. 

  • Ancillary equipment such as consumables, vacuum equipment, hand tools, transformers, extension cables, magnetic sweeper etc. 

identify and connect to the correct power source 

  • 110 V, 240 V, 3-phase or single phase 

  • Understand the dangers of electrocution, precautions required and actions necessary in the event of an accident 

inspect plant & equipment prior to use, recognise and report faults and defects and undertake general maintenance procedures 

  • Consider manufacturers’ specifications, guidance and technical information 

  • General maintenance procedures 

  • Replacement of key components 

  • Dismantling and cleaning equipment 

  • Understand and be able to adopt appropriate procedures for reporting and recording equipment defects 

demonstrate basic skills in the operation and maintenance of equipment 

  • Setting up procedures and inspection before commencing work 

  • Safety features, power supply, speed control and other machine settings 

  • Selection of accessories and shot blasting medium 

use the selected equipment to achieve the surface preparation as stated in the method statement under the instruction of a supervisor 

Understand equipment settings and any adjustments and accessories/medium required to achieve the specified surface profile without damage to the work or surrounding area to receive resin flooring according to the method statement and material manufacturer’s specification 

prepare and maintain the work area. 

  • Setting up safe area of work.  Erect barriers and signage to protect the area of operation 

  • Understand how to measure the work area and check work rates achieved 

leave the work area clean and tidy on completion of the work 

  • Understand regulations for safe removal of waste to conform to environmental regulations 

Additional information about this standard 

Industry guidance: 

  • FeRFA Guide to the Specification & Application of Screeds, The Resin Flooring Association 
  • FeRFA Guide to Preparing Substrates to Receive Resin Flooring and Finishing of Resin Terrazzo Systems
    https://www.ferfa.org.uk/wp-content/uploads/2018/05/TGN11SurfacePrep.pdf  
  • The Resin Flooring Association (FeRFA) website
    www.ferfa.org.uk 
  • BS 8204-1 Screeds, bases and in situ floorings.  Concrete bases and cementitious levelling screeds to receive floorings.  Code of practice 
  • BS 8204-2 Screeds, bases and in situ floorings.  Concrete wearing surfaces.  Code of practice 
  • BS 8204-3 Screeds, bases and in situ floorings.  Polymer modified cementitious levelling screeds and wearing screeds.  Code of practice 
  • BS 8204-7 Screeds, bases and in-situ floorings.  Pumpable self-smoothing screeds.  Code of practice 

Health and Safety Executive (HSE) guidance: 

Control of Substances Hazardous to Health (COSHH)
http://www.hse.gov.uk/coshh/index.htm 

Chemical safety data sheets:
http://www.hse.gov.uk/coshh/basics/datasheets.htm 

Manual handling: 

Manual handling – a brief guide
http://www.hse.gov.uk/pubns/indg143.pdf 

Legislation:  

COSHH
https://www.hse.gov.uk/coshh 

HSWA
http://www.hse.gov.uk/legislation/hswa.htm 

PUWER
http://www.hse.gov.uk/work-equipment-machinery/puwer.htm 

RIDDOR
https://www.hse.gov.uk/riddor 

Related standards 

Flowable screeds 

Thermal and Acoustic Insulation and Underfloor Heating 

Calcium Sulfate Screeds 

Screed Flooring and Equipment Introduction 

Traditional Screeds 

Work Practice and Project Planning for Screed Flooring.

How did we do today? Give feedback