Install internal wall insulation (IWI) - direct bond - refresher
Overview
Category
Internal wall insulation
Duration
3.5 hours
Standard Overview
The purpose of this standard is to provide the learner with the knowledge and skills to support the following:
Scope:
- using health and safety control equipment
- giving good customer service and communicating with homeowners or building occupants
- selecting correct materials and components
- terminology in relation to internal wall insulation (IWI) direct bond/adhesive
- carrying out pre-installation assessments
- preparing properties for the installation of internal wall insulation (IWI) by direct bond/adhesive
- protecting and reinstating existing fixtures and fittings
- implications of existing guarantees and warranties
- installing internal wall insulation (IWI) by direct bond/adhesive methods
- understanding the moisture management strategy including: ventilation, thermal bridges, and air barriers
- understanding the consequences of installing IWI systems incorrectly and into the wrong property type
- checking flues and combustion air ventilation
Learner pre-requisites
Learners are required to have a good understanding of drawings and terminology, wall lining applications, fixings, tools, material handling and building types and services.
Instruction/ supervision
As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have:
- an award in education and training (or equivalent, as per requirements for approved training organisations)
- at least 2 years industrial experience relevant to the scope of the standard
- a verifiable CV
Delivery Materials
All materials and equipment must be of a suitable quality and quantity for Learner to achieve learning outcomes and must comply with relevant legislation.
Delivery – Learner / Trainer Ratio
The learning environment, class size and learner to trainer ratio must allow training to be delivered in a safe manner and enable learners to achieve the learning outcomes.
Allowed Delivery Methods
The following delivery methods may be used in the delivery of this standard:
- face to face learning environment only (such as classroom/workshop etc.)
- a blend of face to face and virtual
- a blend of face to face and e-learning
Is the training mainly practical or theoretical
This standard is to be delivered equally between the practical and theoretical elements of the training.
This standard is considered to be
This standard is considered to be set at an intermediate level.
Assessment Type
Formally Assessed
Assessment Pass / Fail Criteria
For the successful completion of training, learners must complete an end of course knowledge test that measures all learning outcomes and has a pass or fail criteria.
Where this training is assessed using multiple-choice questions, all learning outcomes must be covered over 20 questions and learners are required to achieve an overall pass mark of at least 80%.
Assessment Method
Methods of assessment considered appropriate for training delivered against this standard are:
- multiple choice questions
- short answer questions
- scenarios and case studies of realistic working environments
- practical assessment
- the trainer must be satisfied that the learner has achieved all learning outcomes
Name of proposed Recognised Organisation
CITB
Renewal
Refresher every 36 months
Classification
Mandatory Refresher
Buffer / grace
3 months
Working Group Approval date
9th January 2024
Proof-Read Approval Date
7th December 2023
Review cycle
On request or 5 years from approval date.
Learning outcomes
Including additional guidance to support training delivery and final assessment
The learner will be able to:
Use health and safety control equipment safely, complying with the methods of work (MoW) and current legislation
Delivery guidance:
- an overview of MoW and current legislation
- the importance of complying with MoW and current legislation
Assessment criteria:
- demonstrate knowledge of MoW and current legislation
- demonstrate safe use of health and safety control equipment
Assessment specification:
- as per assessment methodology
Give good customer service, communicate clearly with customers, clients, or building occupants, and resolve issues
Delivery guidance:
- the importance of giving good customer service
- the importance of explaining how the work will be carried out
- checking the customer, client, or building occupants, understanding
- resolving issues in a professional manner
- respecting resident’s property
- the handover process
Assessment criteria:
- group discussion and feedback on a customer service role model and what good customer service looks like
- what needs to be included in the handover process
Assessment specification:
- as per assessment methodology
Select the correct materials and components to IWI by direct bond/adhesive methods
Delivery guidance:
- different types of materials and components
- the importance of adhering to manufacturer’s information
- types of fixing methodology
- dealing with defective materials and components
Assessment criteria:
- demonstrate knowledge of materials and components related to internal wall insulation
- explain the procedures for reporting defective or incorrect materials and components
Assessment specification:
- as per assessment methodology
Understand the basic terminology in relation to applying IWI by direct bond/adhesive methods
Delivery guidance:
- overview of terminology for the following:
- thermal bridging
- condensation
- moisture management
- air tightness
Assessment criteria:
- demonstrate knowledge of the basic terminology
Assessment specification:
- as per assessment methodology
Understand how to carry out pre-installation assessment
Delivery guidance:
- the importance of carrying out pre-installation assessment in relation to the following:
- causes of long-term issues with the building fabric
- structural integrity
- dampness
- vents
- services (gas, electric, water, media cables)
- thermal bridging
- hidden utilities
- the importance of ensuring the property is suitable to receive IWI
- recognising and determining when specialist skills and knowledge are required and report accordingly
Assessment criteria:
- demonstrate knowledge of how to carry out pre-installation assessment
Assessment specification:
- as per assessment methodology
Understand how to prepare properties for the installation of IWI by direct bond/adhesive methods
Delivery guidance:
- the importance of preparing the work and surrounding area
- the importance of removing and reinstating existing fixtures and fittings to their original status and condition
Assessment criteria:
- demonstrate knowledge of how to prepare work, surrounding area, property, and fixtures and fittings
- demonstrate knowledge of how to remove and reinstate fixtures and fittings
Assessment specification:
- as per assessment methodology
Understand how to protect properties for the installation of IWI by direct bond/adhesive methods
Delivery guidance:
- the importance of protecting the work and surrounding area
- the importance of protecting the property including fixtures and fittings
Assessment criteria:
- demonstrate knowledge of how to protect the work, surrounding area, property and fixtures and fittings
- demonstrate knowledge of how to remove and reinstate fixtures and fittings
Assessment specification:
- as per assessment methodology
Understand the implications of existing guarantees and warranties
Delivery guidance:
- the types of guarantees and warranties
- the implications on existing guarantees and warranties when installing IWI by direct bond/adhesive methods
Assessment criteria:
- demonstrate knowledge of implications on existing guarantees and warranties
Assessment specification:
- as per assessment methodology
Install internal wall insulation
Delivery guidance:
- how to install internal wall insulation using direct bond/adhesive methods
- methods for minimising air leakage and thermal bridging
Assessment criteria:
- demonstrate the following skills to meet the requirements of BS8000 part 8 2023 in relation to plasterboard laminates, insulation, and adhesive compounds when:
- measuring
- marking out
- cutting
- fitting and positioning
- sealing and securing
- finishing
Assessment specification:
- as per assessment – tutor will check the practical elements meet the current standards
Understand the importance of ventilation as part of a moisture management strategy
Delivery guidance:
- the importance of identifying existing ventilation
- the long-term issues of poor ventilation
- maintaining ventilation
- installing additional ventilation
Assessment criteria:
- demonstrate a knowledge of identifying, maintaining, and installing, ventilation
Assessment specification:
- as per assessment methodology
Understand the importance of thermal bridges as part of a moisture management strategy
Delivery guidance:
- the importance and effects of thermal bridges
- identifying thermal bridges
- dealing with thermal bridges by maintaining airtightness and ventilation
Assessment criteria:
- demonstrate a knowledge of identifying and resolving thermal bridges
Assessment specification:
- as per assessment methodology
Understand how to install airtightness barriers as part of a moisture management strategy
Delivery guidance:
- why it is important to reduce unintended air movement
- installing airtightness barriers and associated accessories including:
- membranes (active and static)
- airtight tapes
- airtight gaskets
- airtight mastics
Assessment criteria:
- demonstrate knowledge of installing airtightness barriers, the types and function of each type
- demonstrate knowledge of why it is important to reduce unintended air movement
Assessment specification:
- as per assessment methodology
Understand the consequences of installing IWI systems incorrectly and into the wrong property type
Delivery guidance:
- the importance of pre-installation assessments
- information sources such as system design, manufacturer’s guidance, and current legislation
- provide evidence of properties where IWI installation is incorrect or the wrong property type (photos, case studies)
- facts about the financial aspects of remediation
- disruption to customers, residents, and building occupants
Assessment criteria:
- demonstrate knowledge of how to assess the property is suitable to receive IWI
- explain how to install IWI correctly
Assessment specification:
- as per assessment methodology
Understand how to check flues and combustion air ventilation
Delivery guidance:
- the importance of checking flues and combustion air ventilation pre and post installation
- how to check flues and combustion air ventilation
Assessment criteria:
- demonstrate knowledge of checking flues and air combustion ventilation
Assessment specification:
- as per assessment methodology
How did we do today? Give feedback