Forming service penetrations

Last updated: 22 September 2020
Grant rate/tier: £140 (Tier 2)
Grant code: GET2715

Overview

The purpose of this standard is to provide the candidate with practical knowledge and skills required to form service penetrations.

Find a course for this standard

Duration

Minimum 1 day of 6 learning hours

Purpose/ scope

The purpose of this standard is to provide the candidate with practical knowledge and skills required to form service penetrations.

Scope:

instructions, drawings and technical literature
materials and resources
health and safety risks and preventions
personal protective equipment (PPE)
team work
interpret designs
forming of an aperture
framing an aperture
line an aperture
fire taping
cutting of a retrofit aperture
clear, tidy and safe working environment.

Occupational relevance

Training delivered against this standard would be relevant to the following occupational group(s):

operative and craft
supervision.

Candidate pre-requisites

There are no candidate pre-requisites as part of this standard. However a basic knowledge of interior systems terminology, techniques would be beneficial.

Instruction/ supervision

As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:

a train the trainer or instructional techniques course certificate
NVQ level 2, or equivalent, in the relevant discipline
successfully completed training to this standard
at least 3 years relevant industrial experience
a verifiable CV.

Delivery

Delivery may be in an on or off the job environment.

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

The following delivery methods may/may not be used in the delivery of this standard:

practical training in an on or off the job environment
classroom.

This standard is considered to contain 51% or more practical training.

This standard is considered to be set at an intermediate level.

Assessment

For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.

Quality assurance

Assured

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal

No Renewal/Refreshment Requirements - There are no mandatory renewal or recommended refreshment requirements for this standard.

Approval date

October 2019

Review cycle

Either on request or in 3 years from approval date.

Learning outcomes

The candidate will be able to:

Briefly explain instructions, drawings and technical literature.
Select and use materials to be system compliant.
Briefly explain the health and safety risks associated with forming service penetrations.
Demonstrate the correct use of tools, materials and PPE.
Work as part of a team under instruction.
Interpret the manufacturer’s design detail.
Demonstrate the forming of an aperture as per manufacture’s design detail.
Frame the aperture as per manufacture’s design detail.
Line the aperture with appropriate plasterboard as per manufacture’s design detail.
Apply fire taping to the extremities of the aperture.
Explain the process for cutting of a retrofit aperture as per manufacture’s design detail.
Demonstrate the cutting of a retrofit aperture as per manufacture’s design detail.
Frame the aperture as per manufacture’s design detail.
Explain how to interpret design specified.
Protect the work and maintain a clear, tidy and safe working environment.