Production and use of multi-plate stencils - Refresher
Overview
Duration
1 day of 6 learning hours
Purpose/scope
The purpose of the production and use of multi-plate stencils - refresher standard is for delegates who have previously passed training to the production and use of multi-plate stencils standard or subsequent refresher training and can provide proof of attendance.
Occupational relevance
Training delivered against this standard would be relevant to the following occupational groups:
- operative and craft
Delegates pre-requisites
Delegates must have successfully completed training to the production and use of multi-plate stencils standard or subsequent refresher 5 years prior to attending this refresher.
Instruction/supervision
As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have:
- an award in education and training (or equivalent, as per requirements for approved training organisations)
- successfully completed training to this standard
- at least 2 years relevant industrial experience
- a verifiable CV
Delivery
Delivery may be in an on or off the job environment.
All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.
The class size and delegate/trainer ratio must allow training to be delivered in a safe manner and enable delegate to achieve the learning outcomes.
The following delivery methods may be used in the delivery of this standard:
- workshop
This standard is considered to contain 51% or more practical training.
This standard is considered to be set at an intermediate level.
Assessment
Methods of assessment considered appropriate for training delivered against this standard are:
For the successful completion of training, the trainer must be satisfied that the delegate has achieved all learning outcomes.
Quality assurance
Assured
Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.
CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.
Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.
Renewal
Refresher every 5 years
Classification
Recommended Refresher
Buffer/grace period
6 months
Approval date
October 2019
Review cycle
On request or 3 years from approval date.
Learning outcomes to be refreshed
The delegate will be able to:
- adopt safe and healthy work practices, procedures and skills relating to the method/area of work
- check suitability of previously prepared surface
- prepare brushes, rollers, specialised tools and equipment
- form, manufacture, set out and apply multi-plate stencils, including ties
- produce graduated effects by brush, sponge and spray maintain the integrity of the stencil plate (cleanliness and structure)
Additional information about this standard
How did we do today? Give feedback