Installation of service penetration seals refresher

Duration

1 day(s) of 6 learning hours. If e-learning only, the duration is to be at least 50% of this. 

Purpose/scope

The purpose of Installation of service penetration seals refresher course is for delegates who have previously passed the full Installation of service penetration seals course or subsequent refresher course and can provide proof of attendance. 

Occupational relevance

Training delivered against this standard would be relevant to the following occupational group(s):

• operative and craft.

Delegates pre-requisites

Delegates must have successfully completed Installation of service penetration seals within the last 36 months.

Instruction/supervision

As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have:

• an award in education and training (or equivalent, as per requirements for approved training organisations)
• successfully completed training to this standard
• at least 2 years relevant industrial experience
• a verifiable CV.

Delivery

Delivery may be in an on or off the job environment. 

All materials and equipment must be of a suitable quality and quantity for delegates to achieve learning outcomes and must comply with relevant legislation. 

The class size and delegate/trainer ratio must allow training to be delivered in a safe manner and enable delegates to achieve the learning outcomes.  

The following delivery methods may be used in the delivery of this standard: 

• classroom.

This standard is considered to contain 51% or more practical training. 

This standard is considered to be set at an intermediate level.

Assessment

Methods of assessment considered appropriate for training delivered against this standard are:

For the successful completion of training, delegates must complete an end of course practical assessment or knowledge test that measures all learning outcomes and has a pass or fail criteria.

Where this training is assessed using multiple-choice questions, a minimum of 10 questions must be asked and delegates are required to achieve an overall pass mark of at least 85%.

Quality assurance

Assured

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal

Refresher every 3 years.

Classification

Mandatory Refresher.

Keywords

Passive Fire Stopping, Fire Mortar, Coated batts,  Wraps,  Collars,  Pillows,  Graphite Sealant, Intumescent Sealant.

Approval date

June 2021

Review cycle

On request or 3 years from approval date.

Learning outcomes to be refreshed