Paint machines and cold applied paints appreciation - Refresher

Duration

Minimum half day of 3 learning hours 

Purpose/scope

The purpose of the paint machines and cold applied paints appreciation - refresher standard is for delegates who have previously passed training to the full paint machines and cold applied paints appreciation standard or subsequent refresher training and can provide proof of attendance. 

Occupational relevance

Training delivered against this standard would be relevant to the following occupational group(s): 

• operative and craft to level 2 
• supervision 

Delegates pre-requisites

Delegates must have successfully completed training to the paint machines and cold applied paints appreciation standard or subsequent refresher 3 years prior to attending this refresher. 

Instruction/supervision

As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have: 

• an award in education and training (or equivalent, as per requirements for approved training organisations)   
• successfully completed training to this standard 
• at least 2 years relevant industrial experience 
• a verifiable CV 

Delivery

The following methods may be used in the delivery of this standard: 

• practical training: off the job simulated environment (not on the roads) 
• theory training: classroom 

The class size and delegate/trainer ratio must allow training to be delivered in a safe manner and enable delegates to achieve the learning outcomes.  

All materials and equipment must be of a suitable quality and quantity for delegates to achieve learning outcomes and must comply with relevant legislation. 

Learning should include at least 25% of learning activities to suit scenario examples and simulated practical examples. 

Demonstrate operation of mobile equipment and vehicles, with delegates as passengers and observers, off the road, in a closed-access area. 

Delegates may be able to try some basic practical tasks under close supervision and coaching, off the job, after a risk assessment has been completed and risks addressed. This is merely to sample the range of work types, not to gain competency. 

This standard is considered to contain 51% or more practical training. 

Assessment

There is no requirement for training delivered against this standard to be formally assessed. For the successful completion of training, the trainer must be satisfied that the delegate has achieved all the learning outcomes. 

Quality assurance

Assured 

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.  

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.  

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team. 

Renewal

Renewal every 3 years

Classification

Mandatory Renewal

Approval date

November 2018 

Review cycle

On request or 3 years from approval date.

Learning outcomes to be refreshed

The delegate will be able to:

• describe cold paint: types, uses, and performance 
• describe spray paint machine types, uses, and performance 
• prepare the surface for application using brushes, rollers, handheld torches/driers, and primers 
• set out using: tape measures, measuring wheels, alignment ropes, and masking tape 
• describe the setting out regulations: TSRGD, chapter 5, and RSMA update your road markings 
• describe how to work safety: hazards, risks, controls, and safe working practices 
• set up, load, pre check, use, change tips, clean, maintain, and power off a paint machine 

Additional information about this standard

Health & Safety Executive (HSE) 

• Control of Substances Hazardous to Health (COSHH): http://www.hse.gov.uk/coshh 
• Working with substances hazardous to health. A brief guide to COSHH: www.hse.gov.uk/pubns/indg136.pdf 
• Guide to PPE at Work Regulations 1992: http://www.hse.gov.uk/
• Standards and markings for Personal Protective Equipment: http://www.hse.gov.uk
• Safe use of work equipment (PUWER): http://www.hse.gov.uk/pubns/priced/l22.pdf 
• Driving at work: Managing work-related road safety INDG382: www.hse.gov.uk
• Work related road safety: http://www.hse.gov.uk/roadsafety/ 
• Driving at work: Managing work-related road safety: http://www.hse.gov.uk
• Useful road related links: http://www.hse.gov.uk/roadsafety/information.htm 
• Scottish Occupational Road Safety Alliance (ScORSA): http://www.hse.gov.uk/scotland/scorsa.htm 
• Roadside precautions: http://www.hse.gov.uk/mvr/roadside-repair/essential-precautions.htm 
• Risk assessment: http://www.hse.gov.uk/workplacetransport/management/risk.htm 
• Workplace health, safety and welfare: http://www.hse.gov.uk/pubns/indg244.pdf 
• Workplace transport safety: http://www.hse.gov.uk/pubns/indg199.pdf 
• Parking: http://www.hse.gov.uk/workplacetransport/parking.htm 
• A guide to workplace transport safety: http://www.hse.gov.uk/pubns/priced/hsg136.pdf 
• Vehicles at work: http://www.hse.gov.uk/workplacetransport/index.htm 
• Safe driving: loading & unloading: http://www.hse.gov.uk/workplacetransport/factsheets/loading.htm 

Legislation 

http://www.legislation.gov.uk/ 

• The PPE at Work Regulations 1992  
• Provision and Use of Work Equipment Regulations m(PUWER) (1998 UK 1999 NI)  
• The Management of Health and Safety at Work Regulations 1999 
• The Health and Safety at Work etc Act 1974 
• The Workplace (Health, Safety and Welfare) Regulations 1992 
• Health and Safety (Safety Signs and Signals) Regulations 1996 
• Fire Precautions and Workplace Regulations 1997 
• Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR) 1995 

Standards 

https://www.bsigroup.com/ 

• BS EN 1436:2007+A1:2008 Road marking materials. Road marking performance for road users  
• BS EN 1424:1998 Road marking materials. Premix glass beads 
• BS EN 1423:2012 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixes 
• BS EN 1463-1:2009 Road marking materials. Retroreflecting road studs. Initial performance requirements 
• BS EN 1463-2:2000 Road marking materials. Retroreflecting road studs. Road test performance spec’ns 
• BS EN 1463-3. Road marking materials. Part 3. Active road studs  
• BS EN 1790:2013 Road marking materials. Preformed road markings 
• BS EN 1871:2000 Road marking materials. Physical properties 
• BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications 
• BS 3262-3:1989 Hot-applied thermoplastic road marking materials. Specification to apply to road surfaces 

Government 

https://www.gov.uk/ 

• Licensing: https://www.gov.uk/government/organisations/driver-and-vehicle-licensing-agency 
• Highways: https://www.gov.uk/government/organisations/highways-england 
• Tax MOT insurance: https://www.gov.uk/browse/driving/vehicle-tax-mot-insurance 
• The Highway Code for England, Scotland and Wales: https://www.gov.uk/guidance/the-highway-code 
• The Highway Code for Northern Ireland: https://www.nidirect.gov.uk/articles/highway-code 
• Standards for Highways: https://www.gov.uk/guidance/standards-for-highways-online-resources 
• Books and guides: https://www.tsoshop.co.uk/ 

Related standards

Road marking specialist applied-skills programme (SAP) modules. 

Pavement marking: Manual level 2 VQ 

Pavement marking: Road studs 

CITB 

Operative refresher assessment scheme (ORAS)  

Pedestrian applicator 

Road marking industry induction programme  

Thermoplastic operational safety 

Understanding ADR exemptions 

Hand applied screed markings 

Preformed, temporary markings & surface mounted studs 

Handheld line removal 

Inset road studs appreciation 

Machine applied road markings appreciation 

Near miss reporting for road marking operatives  

COSHH for road marking operatives 

Airless spray paint machine (Graco) 

Traffic management for road safety marking