Guidelines for tiling
Overview
CITB has developed this standard in discussion with industry
Duration
Minimum 3 learning hours
Purpose/scope
The purpose of this standard is to provide the candidate with the basic knowledge of to fix tiles.
The scope of this standard covers:
- walls and floor
- show to check backgrounds (substrates)
- how to fix using adhesives
- how to fix using cement mortar
- tolerances including: flatness, plumb, joints, and joint width
- how to select and use grout
- how to select and install movement joints
- how to protect cement mortar
- main legislation, codes of practice, guides, and standards
Occupational relevance
Training delivered against this standard is relevant to the following occupational group(s):
- operative and craft
- supervision
Candidate prerequisites
There are no candidate pre-requisites as part of this standard. However, a basic knowledge of tiling terminology and techniques would be beneficial.
Instruction/supervision
As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:
- A train the trainer or instructional techniques course certificate
- Successfully completed training to this standard
- At least 2 years relevant industrial experience
- A verifiable CV
Delivery
The following method(s) may be used in the delivery of this standard:
- classroom and workshop
- on site in a safe and supervised environment
All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.
The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.
This standard is considered to contain 51 per cent or more theoretical training.
Assessment
For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.
Quality assurance
Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.
CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the Training Standard.
Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.
Renewal/refresher
There are no mandatory renewal or recommended refreshment requirements for this standard.
Approval date
November 2018
Review cycle
Either on request or in 3 years from approval date.
Learning outcomes
Select tiles for swimming pool linings including:
The candidate will be able to |
Additional guidance to support learning outcome |
|
---|---|---|
Describe design considerations including:
|
Tools and equipment Samples Suppliers/Manufacturer’s brochure Manufacturer’s instructions Video example of installation process Videos of good and bad practice Scenarios with photos to practice selection of: tiles, grouts, joints, and adhesives SDS sheets for COSSH Photos of good and bad installations Print or PDF (full/extract) of relative standards, codes, and guides |
|
Describe structural aspects design including:
|
||
Select tiles for swimming pool surrounds and shower/wet changing areas including:
|
||
Describe important points including:
|
||
Select and use adhesives and grouts including:
|
||
Beds and backings including direct fixing and indirect fixing including:
|
||
How to fix tiles including:
|
||
Treat pool water including:
|
||
Describe curing and drying periods including:
|
||
Clean and maintain the pool |
||
Work safely including:
|
Examples of:
|
|
Comply with related legislation, codes of practice, and standards. |
Safety legislation (H&SAWA, COSSH, PUWER, LOLER, Work at Height), HSE guidance, manufacturer’s documents, British/EN/ISO Standards, codes of practice, association guidance, building regulations, SDS sheets, company procedures, risk assessments, safe work procedures, environmental protection, and use of PPE. |
Additional information about this standard
Other organisations have relevant information for this standard
- The Tile Association (TTA) Adhesives and grouts in internal tiling for TTA members
- Construction Industry Research and Information Association (CIRIA) Safer surfaces to walk on - reducing the risk of slipping (C652)
Health & Safety Executive (HSE) guides
- Safety topics for demolition
- Health & Safety at Work etc Act 1974
- Health and safety in construction
- Working at height
- PPE
- PUWER
- COSHH
- RIDDOR
- LOLER
- CDM
- Manual handling
- Noise
- Hand-arm vibration
- Electrical
- Safe use of work equipment
Legislation
View relevant government legislation
- Health and Safety at Work etc Act 1974
- Workplace (health, safety & welfare) regulations 1992
- The Work at Height Regulations 2005
- Work at Height (Amended) 2007
- Personal Protection Equipment Regulations 2002 (PPE)
- Personal Protection Equipment at Work Regulations 1992 (PPE)
- Provision and Use of Work Equipment Regulations (1998 UK 1999 NI) PUWER
- Control of Substances Hazardous to Health Regulations 2002 (COSHH)
- Lifting Operations and Lifting Equipment Regulations 1998 (LOLER)
- Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 1995 (RIDDOR)
- CDM Construction Design and Management Regulations 2015 CDM
- Construction (Health, Safety and Welfare) Regulations 1996
- Manual Handling Operations Regulations 1992 as amended 2002
- Control of Noise at Work Regulations 2005
- Control of Vibration at Work Regulations 2005
Building regulations
- Building and Buildings, England and Wales: The Building Regulations 2010.
- The Building (Scotland) Regulations 2004
- Statutory Rules of Northern Ireland
Approved documents (guidance for building regulations)
- Resistance to the passage of sound: Approved Document E
- Access to and use of buildings: Approved Document M
Building information modelling (BIM)
Work at Height Safety Association
- The WAHSA Technical Guidance Notes are a free resource, provided and maintained by WAHSA and its members. A reference for: specifiers, managers, and end users of fall protection equipment.
BS-EN-ISO standards
Miscellaneous
- BS EN 131- 1 to 7: Ladders. Terms, types, sizes, requirements, testing, marking, user instructions
- BS 8000-0: 2014. Workmanship on construction sites. Introduction and general principles. Note that this standard partially replaces/supersedes BS 8000-1 to 16.
- BS 6093: 2006+A1:2013. Design of joints and jointing in building construction. Guide.
Substrates and screeds
- BS EN 636-3: 2003 Plywood. Specifications
- BS 4483: 2005. Steel fabric for the reinforcement of concrete. Specification.
- BS 8204-1 to 7 Screeds, bases and in situ floorings: Codes of practice. Concrete, cementitious levelling, polymer, terrazzo, mastic asphalt, synthetic resin, pumpable self-smoothing screeds
Wall and floor tiling, design & installation, code of practice
- BS 5385-1: 2018 Ceramic, natural stone and mosaic wall tiling in normal internal conditions
- BS 5385-2: 2015 External ceramic, natural stone and mosaic wall tiling in normal conditions
- BS 5385-3: 2014 Internal and external ceramic and mosaic floor tiling in normal conditions
- BS 5385-4: 2015 Ceramic and mosaic tiling in specific conditions
- BS 5385-5: 2009 Terrazzo, natural stone and agglomerated stone tile and slab flooring
Ceramic tile specifications
- BS EN ISO 10545- 1 to 16: Specifications for ceramic tiles including: dimensions, surface quality, water absorption, porosity, relative density, bulk density, modulus of rupture and breaking strength, impact resistance by measurement of coefficient of restitution, resistance to deep abrasion for unglazed tiles, resistance to surface abrasion for glazed tiles, linear thermal expansion, resistance to thermal shock, moisture expansion, crazing resistance for glazed tiles, frost resistance, chemical resistance, resistance to stains, lead and cadmium given off by glazed tiles, colour differences.
- BS EN 14411: 2016 Definition, class’n, characteristics, assess, verify, performance, marking
- BS EN 14891: 2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, tests, assess, verify, performance, class, and marking
Stone products
- BS EN 12057: 2015 Natural stone products. Modular tiles. Requirements
- BS EN 14157: 2017 Natural stone test methods. Determination of the abrasion resistance
- BS EN 14618: 2009 Agglomerated stone. Terminology and classification
- BS EN 15285: 2008. Agglomerated stone. Modular tiles for floor and stairs (internal and external).
- BS EN 14617- 1 to 16 Agglomerated stone. Test methods: flexural strength (bending), apparent density and water absorption, electrical resistivity, chemical resistance, thermal shock resistance, freeze and thaw resistance, dimensional stability, abrasion resistance, resistance to fixing (dowel hole), linear thermal expansion coefficient, compressive strength, dimensions, geometry, surface quality, and impact resistance
Terrazzo tiles
- BS EN 13748- 1 & 2: 2004 Terrazzo tiles for internal use, and external use
Grouts and adhesives
- BS ISO 14448: 2016 Low modulus adhesives for exterior tile finishing.
- BS EN 12004- 1 & 2: 2017 Adhesives for ceramic tiles. Requirements, assessment, verification, performance, classification, marking, and testing
- BS EN 12808- 1 to 5: Grouts for tiles. Determination of: chemical resistance of reaction resin mortars, resistance to abrasion, flexural and compressive strength, shrinkage, and water absorption
- BS ISO 13007- 1 to 5: Ceramic tiles. Grouts and adhesives. Terms, definitions, specifications for adhesives. Test methods for adhesives. Terms, definitions and specifications for grouts. Test methods for grouts. Requirements, tests, conformity, classification and designation of liquid-applied waterproofing membranes for use beneath adhesive-bonded ceramic tiling
- BS EN 13888: 2009 Grout for tiles. Requirements, evaluation of conformity, class and designation
The Tile Association (TTA)
www.tiles.org.uk/services/technical-publications/
- Adhesives and grouts in internal tiling for TTA members
Construction Industry Research and Information Association (CIRIA)
- Safer surfaces to walk on - reducing the risk of slipping (C652)
Health & Safety Executive (HSE) guides
- Health & Safety at Work etc Act 1974: www.hse.gov.uk/legislation/hswa.htm
- Workplace (Health, Safety & Welfare) regulations 1992: www.hse.gov.uk/pubns/books/l24.htm
- Health and safety in construction: www.hse.gov.uk/construction/index.htm
- Working at height: www.hse.gov.uk/work-at-height/resources.htm
- PPE: www.hse.gov.uk/toolbox/ppe.htm
- PUWER: www.hse.gov.uk/work-equipment-machinery/puwer.htm
- COSHH: www.hse.gov.uk/coshh
- RIDDOR: www.hse.gov.uk/riddor/
- LOLER: www.hse.gov.uk/work-equipment-machinery/loler.htm
- CDM: www.hse.gov.uk/construction/cdm/2015/index.htm
- Manual handling: www.hse.gov.uk/toolbox/manual.htm
- Noise: www.hse.gov.uk/noise/index.htm
- Hand-arm vibration: www.hse.gov.uk/vibration/hav/index.htm
- Electrical: www.hse.gov.uk/electricity/hse.htm
- Assessing the slip resistance of flooring: www.hse.gov.uk/pubns/geis2.pdf
Legislation
http://www.legislation.gov.uk/
- Health and Safety at Work etc Act 1974
- Workplace (health, safety & welfare) regulations 1992
- The Work at Height Regulations 2005
- Work at Height (Amended) 2007
- Personal Protection Equipment Regulations 2002 (PPE)
- Personal Protection Equipment at Work Regulations 1992 (PPE)
- Provision and Use of Work Equipment Regulations (1998 UK 1999 NI) PUWER
- Control of Substances Hazardous to Health Regulations 2002 (COSHH)
- Lifting Operations and Lifting Equipment Regulations 1998 (LOLER)
- Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 1995 (RIDDOR)
- CDM Construction Design and Management Regulations 2015 CDM
- Construction (Health, Safety and Welfare) Regulations 1996
- Manual Handling Operations Regulations 1992 as amended 2002
- Control of Noise at Work Regulations 2005
- Control of Vibration at Work Regulations 2005
Building regulations
- Building and Buildings, England and Wales: The Building Regulations 2010
- The Building (Scotland) Regulations 2004
- Statutory Rules of Northern Ireland
Approved documents (guidance for building regulations)
www.gov.uk/government/collections/approved-documents
- Resistance to the passage of sound: Approved Document E
- Access to and use of buildings: Approved Document M
Building information modelling (BIM)
- A multi-volume subscription library of clauses covering building construction
Work at Height Safety Association
www.wahsa.org.uk/?s=technical+guidance
The WAHSA Technical Guidance Notes are a free resource, provided and maintained by WAHSA and its members. A reference for: specifiers, managers, and end users of fall protection equipment.
BS-EN-ISO standards
Miscellaneous
- BS EN 131- 1 to 7: Ladders. Terms, types, sizes, requirements, testing, marking, user instructions
- BS 8000-0: 2014. Workmanship on construction sites. Introduction and general principles. Note that this standard partially replaces/supersedes BS 8000-1 to 16.
- BS 6093: 2006+A1:2013. Design of joints and jointing in building construction. Guide.
Substrates and screeds
BS EN 636-3: 2003 Plywood. Specifications
BS 4483: 2005. Steel fabric for the reinforcement of concrete. Specification.
BS 8204-1 to 7 Screeds, bases and in situ floorings: Codes of practice. Concrete, cementitious levelling, polymer, terrazzo, mastic asphalt, synthetic resin, pumpable self-smoothing screeds.
Wall and floor tiling, design installation, code of practice
- BS 5385-1: 2018 Ceramic, natural stone and mosaic wall tiling in normal internal conditions
- BS 5385-2: 2015 External ceramic, natural stone and mosaic wall tiling in normal conditions
- BS 5385-3: 2014 Internal and external ceramic and mosaic floor tiling in normal conditions
- BS 5385-4: 2015 Ceramic and mosaic tiling in specific conditions
- BS 5385-5: 2009 Terrazzo, natural stone and agglomerated stone tile and slab flooring
Ceramic tile specifications
- BS EN ISO 10545- 1 to 16: Specifications for ceramic tiles including: dimensions, surface quality, water absorption, porosity, relative density, bulk density, modulus of rupture and breaking strength, impact resistance by measurement of coefficient of restitution, resistance to deep abrasion for unglazed tiles, resistance to surface abrasion for glazed tiles, linear thermal expansion, resistance to thermal shock, moisture expansion, crazing resistance for glazed tiles, frost resistance, chemical resistance, resistance to stains, lead and cadmium given off by glazed tiles, colour differences.
- BS EN 14411: 2016 Definition, class’n, characteristics, assess, verify, performance, marking
- BS EN 14891: 2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, tests, assess, verify, performance, class, and marking
Stone products
- BS EN 12057: 2015 Natural stone products. Modular tiles. Requirements
- BS EN 14157: 2017 Natural stone test methods. Determination of the abrasion resistance
- BS EN 14618: 2009 Agglomerated stone. Terminology and classification
- BS EN 15285: 2008. Agglomerated stone. Modular tiles for floor and stairs (internal and external)
- BS EN 14617- 1 to 16 Agglomerated stone. Test methods: flexural strength (bending), apparent density and water absorption, electrical resistivity, chemical resistance, thermal shock resistance, freeze and thaw resistance, dimensional stability, abrasion resistance, resistance to fixing (dowel hole), linear thermal expansion coefficient, compressive strength, dimensions, geometry, surface quality, and impact resistance
Terrazzo tiles
- BS EN 13748- 1 & 2: 2004 Terrazzo tiles for internal use, and external use
Grouts and adhesives
- BS ISO 14448: 2016 Low modulus adhesives for exterior tile finishing
- BS EN 12004- 1 & 2: 2017 Adhesives for ceramic tiles. Requirements, assessment, verification, performance, classification, marking, and testing
- BS EN 12808- 1 to 5: Grouts for tiles. Determination of: chemical resistance of reaction resin mortars, resistance to abrasion, flexural and compressive strength, shrinkage, and water absorption
- BS ISO 13007- 1 to 5: Ceramic tiles. Grouts and adhesives. Terms, definitions, specifications for adhesives. Test methods for adhesives. Terms, definitions and specifications for grouts. Test methods for grouts. Requirements, tests, conformity, classification and designation of liquid-applied waterproofing membranes for use beneath adhesive-bonded ceramic tiling
- BS EN 13888: 2009 Grout for tiles. Requirements, evaluation of conformity, class and designation
How did we do today? Give feedback