MDF cutting safety
Overview
CITB has developed this standard in discussion with industry
Duration
Minimum 1 day of 6 learning hours
Purpose/scope
The purpose of training delivered against this standard is to provide candidates with an introduction to the hazards associated with cutting Medium density fibreboards (MDF)
The scope includes:
- risks associated with working with MDF
- MDF identification
- precautions that should be taken when working with MDF
- personal protective equipment (PPE)
- respiratory protective equipment (RPE).
Occupational relevance
Training delivered against this standard would be relevant to the following occupational groups:
- operative and craft
- supervision
- management and leadership.
Candidate pre-requisites
There are no candidate pre-requisites as part of this standard.
Instruction/supervision
As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:
- A train the trainer or instructional techniques course certificate
- Successfully completed training to this standard
- At least 2 years relevant industrial experience
- A verifiable CV.
Delivery
Delivery may be in an on or off the job environment.
All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes, and must comply with relevant legislation.
The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.
This standard is considered to contain 51 per cent or more theoretical training.
Assessment
For the successful completion of training, the trainer will be required to make a declaration of the learner’s contribution during the course and that they are confident the learner has understood the content of the course.
Quality assurance
Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.
CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the Training Standard.
Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.
Renewal/refresher
Health & safety executive (HSE), other relevant codes of practice or industry card scheme criteria recommend that the candidate completes a refresher of his/her training (i.e. to ensure their knowledge and/or skills are up to date) every 5 years.
Approval date
November 2018
Review cycle
Either on request or in 3 years from approval date.
Learning outcomes
The candidate will be able to
- Learning outcomes
- Identify the hazards associated with working with MDF
- Identify how MDF is labelled
- Describe the precautions that should be taken when working with MDF
- Specify the PPE and RPE requirements when working with MDF
Additional guidance to support learning outcome
Additional information about this standard
British standards
- BS EN 622-1:2003 Fibreboards-Specifications - Part 1: General requirements
- BS EN 622-5:2009 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
How did we do today? Give feedback